top of page
CLOSED TOROID PA50 DIA. 50MM front

CLOSED TOROID PA50 DIA. 50MM

This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 85A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 50 millimeters and the weight is 0.200kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 25 millimeters. The maximum cross section per phase (R, S, T, N) is 50mm² for a copper conductor.
SKU: 50438

  • Product Info

    Range VigiPacT
    Device short name PA50
    Product or component type Earth leakage current sensor
    Device application Equipment monitoring and control
    Range compatibility VigiPacT RH10M residual current protection relay
    VigiPacT RH10P residual current protection relay
    VigiPacT RH21M residual current protection relay
    VigiPacT RH21P residual current protection relay
    VigiPacT RH68M residual current protection relay
    VigiPacT RH86M residual current protection relay
    VigiPacT RH86P residual current protection relay
    VigiPacT RH99M residual current protection relay
    VigiPacT RH99P residual current protection relay
    VigiPacT RH197M residual current protection relay
    VigiPacT RH197P residual current protection relay
    VigiPacT RHU residual current protection relay
    VigiPacT RHUs residual current protection relay
    VigiPacT RMH residual current protection relay
    current sensor type A type closed toroid
    [Ie] rated operational current 85 A
    Complementary
    Transformer ratio 1/1000
    Network type AC/DC
    Network frequency 45...440 Hz
    [Icw] rated short-time withstand current 85 kA for 0.5 s
    Residual short-circuit withstand current 85 kA / 0.5 s conforming to IEC 60947-2
    [Ui] rated insulation voltage 1000 V
    Overvoltage category IV
    [Uimp] rated impulse withstand voltage 12 kV
    Mounting mode Fixed (plain backplate)
    Fixed (profiled sheet metal)
    Fixed (slotted backplate)
    Clip-on (DIN rail)
    Clip-on (Vigirex relay)
    Calorific value 1.42 MJ
    Connections - terminals Screw connection 0.22 mm²
    Diameter 50 mm inner:
    Cable outer diameter 25 mm: 50 mm² (maximum)
    Net weight 0.2 kg
    height 108 mm
    Width 88 mm
    Depth 29 mm
    Environment
    IP degree of protection Connectors: IP20
    IP30
    Environmental characteristic Exposure to damp heat not in service (25...55 °C, RH 95 %) : 28 cycles conforming to IEC 60068-2-30
    Salt mist: Kb/2 conforming to IEC 60068-2-52
    Exposure to damp heat in service: category C2: 48 hours conforming to IEC 60068-2-56
    Pollution degree Level 3 conforming to IEC 60664-1
    Ambient air temperature for operation -35…70 °C
    Ambient air temperature for storage -55…85 °C
    Standards IEC 60947-2
    product certifications CE
    Packing Units
    Unit Type of Package 1 PCE
    Number of Units in Package 1 1
    Package 1 Height 4 cm
    Package 1 Width 12.8 cm
    Package 1 Length 17.1 cm
    Package 1 Weight 180 g
    Unit Type of Package 2 S04
    Number of Units in Package 2 100
    Package 2 Height 30 cm
    Package 2 Width 40 cm
    Package 2 Length 60 cm
    Package 2 Weight 18.766 kg

  • Return & Refund Policy

  • Shipping Info

No Reviews YetShare your thoughts. Be the first to leave a review.
bottom of page