top of page
EM1220H Energy meter Cl 1.0 RS485 LCD front

EM1220H Energy meter Cl 1.0 RS485 LCD

Schneider Electric EM1220H CL 1.0 RS, METSEEM1220HCL1 is a premium quality product from Schneider Electric. All Schneider Electric EM1220H CL 1.0 RS, METSEEM1220HCL1 are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture Schneider Electric EM1220H CL 1.0 RS, METSEEM1220HCL1, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. Schneider Electric products are widely acknowledged in the market for their high quality. 
SKU: METSEEM1220HCL1

  • Product Info

    Range EasyLogic
    Product or component type Energy meter
    Complementary
    Power quality analysis Total harmonic distortion
    Device application Energy monitoring
    Type of measurement Current
    Voltage
    Frequency
    Power factor
    Phase angle
    RPM
    Peak demand power
    Harmonic distorsion (I THD & U THD)
    Active power
    Active energy
    Metering type Average current Iavg
    Phase currents
    Active power P, P1, P2, P3
    Active, reactive, apparent energy (signed, four quadrant)
    Rotation speed
    Average voltage Vavg
    Calculated neutral current
    Unbalance current
    Unbalance voltage
    Frequency
    Voltage U21, U32, U13, V1, V2, V3
    Demand power P, Q, S
    Power factor and displacement PF (signed, four quadrant)
    Phase current I1, I2, I3 RMS
    counter functions ON hour counting
    ON-load hour counting
    Power interruption
    [Us] rated supply voltage 48...277 V AC/DC
    Network frequency 50 Hz
    60 Hz
    [In] rated current 1 A
    5 A
    type of network 3P
    2P + N
    1P + N
    3P + N
    2P
    Maximum power consumption in VA 4 VA at 240 V
    Maximum power consumption in W 2 W at 240 V
    display type LCD display
    Display colour Monochrome
    Display digits 12 digit(s)
    communication of data Reading of measurements
    All counters
    Revolution speed
    Last cleared log
    Instantaneous and demand values
    Tamperproof of settings Protected by access code
    Sampling rate 32 samples/cycle
    Measurement current 5…6000 mA
    Signal Voltage (impedance 5 MOhm)4 x 
    Current 0.005...10 A (impedance 0.3 MOhm)6 x
    Measurement voltage 46…277 V AC 50...60 Hz between phase and neutral
    80…480 V AC 50...60 Hz between phases
    277…999000 V AC 50...60 Hz with external VT
    Frequency measurement range 45…65 Hz
    Measurement accuracy Current +/- 0.5 %
    Voltage +/- 0.5 %
    Frequency +/- 0.05 %
    Power factor +/- 0.01
    Reactive power +/- 2 %
    Active power +/- 1 %
    Apparent power +/- 1 %
    Active energy +/- 1 %
    Reactive energy +/- 2 %
    Apparent energy +/- 1 %
    Harmonic distorsion (I THD & U THD) +/- 5 %
    Accuracy class Class 1 active energy conforming to IEC 62053-21
    Class 1 reactive energy conforming to IEC 62053-24
    Demand intervals 1 s
    Local signalling Green LED: activity
    Red LED: output signal 1...9999000 pulse/ k_h (kWh, kVAh, kVARh)
    LED: voltage indication
    Communication port protocol Modbus at 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps even/odd or none - 2 wires, insulation 2500 V
    Communication port support Screw connector: RS485
    data recording Energy consumption logs
    Material Polycarbonate
    Flame retardance V-0 conforming to UL 94
    Mounting mode Flush-mounted
    Mounting support Framework
    provided equipment Installation guide
    installation category III
    Type of installation Indoor installation
    Measurement category Category III 480 V
    Electrical insulation class Class II
    Connections - terminals Current circuit: screw clamp terminals (bottom) 2.08…3.31 mm² cable(s) 
    Voltage circuit: screw clamp terminals (top) 0.82…3.31 mm² cable(s) 
    Control circuit: screw clamp terminals (top) 0.82…3.31 mm² cable(s) 
    Communication: screw clamp terminals (bottom) 0.33…3.31 mm² cable(s)
    Tightening torque Current circuit: 0.9…1 N.m Philips No 2 screwdriver 
    Voltage circuit: 0.9…1 N.m Philips No 2 screwdriver 
    Control circuit: 0.9…1 N.m Philips No 2 screwdriver 
    Communication: 0.5…0.6 N.m Philips no 1 screwdriver
    Wire stripping length Current circuit: 3.68 mm
    Voltage circuit: 7 mm
    Control circuit: 7 mm
    7 mm
    Standards IEC 61010-1:ed. 3
    UL 61010-1:ed. 3
    Product certifications CE conforming to IEC 61010-1
    CULus conforming to UL 61010-1
    CULus conforming to CSA C22.2 No 61010-1
    C-Tick
    Width 96 mm
    Depth 13 mm outside: 
    49 mm panel:
    height 96 mm
    Net weight 300 g
    Environment
    Electromagnetic compatibility Electrostatic discharge conforming to IEC 61000-4-2
    Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3
    Electrical fast transient/burst immunity test conforming to IEC 61000-4-4
    Surge immunity test conforming to IEC 61000-4-5
    Conducted RF disturbances conforming to IEC 61000-4-6
    Magnetic field at power frequency conforming to IEC 61000-4-8
    Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
    Emission tests conforming to FCC part 15 class A
    Emission tests conforming to FCC part 15 Subpart C
    Emission tests conforming to FCC part 15 Subpart E
    Overvoltage category III
    IP degree of protection IP51 front: conforming to IEC 60529
    IP30 body: conforming to IEC 60529
    Relative humidity 5…95 % at 50 °C
    Pollution degree 2
    Ambient air temperature for operation -10…60 °C
    Ambient air temperature for storage -20…70 °C
    Operating altitude <= 2000 m
    Service life 7 year(s)
    Packing Units
    Unit Type of Package 1 PCE
    Number of Units in Package 1 1
    Package 1 Height 9.65 cm
    Package 1 Width 21.08 cm
    Package 1 Length 24.13 cm
    Package 1 Weight 544.311 g

  • Return & Refund Policy

  • Shipping Info

No Reviews YetShare your thoughts. Be the first to leave a review.
bottom of page