top of page
SOFT-START STOP 6A 380 415V front

SOFT-START STOP 6A 380 415V

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 6A. This Altistart 01 can be used for a motor rated power up to 1.1kW or 1.5hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
SKU: ATS01N206QN

  • Product Info

    Range of product Altistart 01
    Product or component type Soft starter
    Product destination Asynchronous motors
    Product specific application Simple machine
    Device short name ATS01
    Network number of phases 3 phases
    [Us] rated supply voltage 380...415 V - 10...10 %
    Motor power kW 3 kW, 3 phases at 380...415 V
    1.5 kW, 3 phases at 380...415 V
    2.2 kW, 3 phases at 380...415 V
    IcL starter rating 6 A
    Utilisation category AC-53B conforming to EN/IEC 60947-4-2
    Current consumption 30 A at nominal load
    Type of start Start with voltage ramp
    Power dissipation in W 4 W at full load and at end of starting
    64 W in transient state
    Environment
    Electromagnetic compatibility Conducted and radiated emissions level B conforming to CISPR 11
    Conducted and radiated emissions level B conforming to IEC 60947-4-2
    Damped oscillating waves level 3 conforming to IEC 61000-4-12
    Electrostatic discharge level 3 conforming to IEC 61000-4-2
    EMC immunity level 3 conforming to EN 50082-1
    EMC immunity level B conforming to EN 50082-2
    Harmonics level 3 conforming to IEC 1000-3-2
    Harmonics level 3 conforming to IEC 1000-3-4
    Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6
    Immunity to electrical transients level 4 conforming to IEC 61000-4-4
    Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
    Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11
    Voltage/current impulse level 3 conforming to IEC 61000-4-5
    Standards EN/IEC 60947-4-2
    product certifications UL
    CSA
    GOST
    C-Tick
    CCC
    IP degree of protection IP20
    Pollution degree 2 conforming to EN/IEC 60947-4-2
    Vibration resistance 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
    1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
    Shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27
    Relative humidity 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
    Ambient air temperature for operation -10…40 °C (without derating)
    40…50 °C (with current derating of 2 % per °C)
    Ambient air temperature for storage -25…70 °C conforming to EN/IEC 60947-4-2
    Operating altitude <= 1000 m without derating
    > 1000 m with current derating of 2.2 % per additional 100 m
    Packing Units
    Unit Type of Package 1 PCE
    Number of Units in Package 1 1
    Package 1 Height 5.500 cm
    Package 1 Width 15.200 cm
    Package 1 Length 17.500 cm
    Package 1 Weight 535.000 g
    Unit Type of Package 2 S03
    Number of Units in Package 2 14
    Package 2 Height 30.000 cm
    Package 2 Width 30.000 cm
    Package 2 Length 40.000 cm
    Package 2 Weight 7.936 kg
    Unit Type of Package 3 P06
    Number of Units in Package 3 112
    Package 3 Height 75.000 cm
    Package 3 Width 60.000 cm
    Package 3 Length 80.000 cm
    Package 3 Weight 74.124 kg

  • Return & Refund Policy

  • Shipping Info

No Reviews YetShare your thoughts. Be the first to leave a review.
bottom of page